Operating Guide
Termix VVX Compact 28/18 – 7 Series BS-HC
6.3.3 Fitting piece
The substation is equipped with a fitting piece for energy meter.
Assembly of energy meters:
1: Close ball valves
Close the ball valves on DH Supply and DH Return, if there is water
on the system.
2: Loosen nuts
Loosen the nuts on the fitting piece.
3: Remove fitting piece
Remove the fitting piece and replace it with the energy meter. Do
not forget the gaskets.
4: Tighten connections
After mounting of the energy meter remember to check and
tighten all threaded connections.
Sensor pocket, energy meter
The sensors of the energy meter is mounted in the sensor pockets.
6.3.4 Domestic hot water pump
Important!
It is necessary to mount a domestic hot water circulation pump on
the water heater to avoid regulation problems.
The circulation pump can not be switched off, since this will result
in regulation problems. (no flow at the sensor).
LGB42404
DEN-GT
19
Summary of Contents for Termix VVX Compact 28/18 - 7 BS-HC Series
Page 24: ...Operating Guide Termix VVX Compact 28 18 7 Series BS HC 24 DEN GT LGB42404...
Page 25: ...Operating Guide Termix VVX Compact 28 18 7 Series BS HC LGB42404 DEN GT 25...
Page 26: ...Operating Guide Termix VVX Compact 28 18 7 Series BS HC 26 DEN GT LGB42404...
Page 28: ...Operating Guide Termix VVX Compact 28 18 7 Series BS HC Produced by Gemina Termix A S 04 2018...