Danfoss T70 2, User Manual

Page: 11 / 16

2. Place the batteries in the compartments of the battery charger.
3. Optional: If charging multiple batteries, wait at least 5 seconds before placing the second battery in
the other compartment.
Possible damage to battery!
Be sure to charge batteries in environments with temperatures over 0° C.
CB70 status LEDs
Each battery compartment has an LED that indicates the status of the batteries' charge.
Green LED; pulsing Battery is excessively depleted
Green LED; continuous Normal charging operation mode
Green LED; off Battery charging process is complete
The battery charger must be placed and used out of the danger area.
Remote control battery charging tips
The battery lifespan is estimated to be 500 recharging cycles and is largely dependent on the conditions
of use.
To maximize the lifespan of the batteries and battery charger, follow these tips:
•
Do not recharge the battery until needed, as shown with slow, red LED pulse on the transmitter
•
Always charge the batteries at temperatures between 0° and 45° C
•
Do not leave the battery charger or batteries in direct sunlight
•
Charge batteries at least once every six months
•
Avoid short circuits between the battery contacts; do not transport charged batteries in toolboxes or
next to other metal objects
•
Always keep contacts clean
User Manual
T70 2 Transmitter
Charger and battery
© Danfoss | January 2019 BC292360528568en-000101 | 11