AMP
Deutch
min. 20.8 [0.819] max. 22.3 [0.878]
min. 27 [1.06] max. 30 [1.81]
min 45[1.77]
30 ± 5 N•m
[266 ± 45 lbf•in]
P006 091
Customer
consol plate
Customer
consol plate
OTP
OTP
OSP
OSP
SASA
SASA
There is a risk of bending the spline profile of SASA sensor in case of using force.
Make sure that the spline profile of the SASA sensor is aligned to the profile of the steering column shaft.
A safe method of assembly is to place SASA sensor on the steering column spline shaft first - and not
opposite!
Cable Connections
AMP connector version, type 2-967059-1
AMP connector pin-out
4
3
2
1
1. CAN-Low
2. + Supply voltage
3. Ground
4. CAN-High
Mating connector assembly
AMP type 2-965261-1
JPT contact
2-962915-1
Wire sealing
828904-1
Installation Guide
Steering Wheel Sensor, Type SASA
SASA Assembly
4 |
©
Danfoss | June 2017
AN00000360en-US0101
