Danfoss RET M, User & Installation Instructions Manual

Page: 13 / 104

13
Thermostat status (cool mode only)
A snowflake symbol will be lit whenever the thermostat is calling
for cooling. If this is seen to flash, the thermostat output is delayed
for a short period to prevent compressor damage.
RET M-LS model only
This model is fitted with an Auto/Off switch .
When the switch is set in “I” position the
thermostat controls at the temperature set by
the setting dial.
When set to “O” the thermostat output is turned off and “Of” is
displayed.
U
ser Instr
uc
tions
GB