5
Fix at a height of approximately 1.5m from the
fl
oor,
away from draughts or heat sources such a fan-coil
outlets, sunlight or of
fi
ce equipment.
Pipe sensor location
Fix the pipe sensor to the
fl
ow pipe using the clamping
band supplied.
Important note:
It is essential that the circuit in which
the pipe sensor is located is not closed off and that
water circulates past the sensor at all times when the
system is in operation. This may require the
fi
tting of a
bypass valve between system
fl
ow and return to ensure
circulation past the sensor.
!
PS1
%
BYPASS
PS1
!
GB - Installation Instructions
Summary of Contents for RET 230 HCW-3
