PLUS+1
®
Mobile Machine Modules
PLUS+1
®
Mobile Machine Modules are designed to provide flexible, expandable, powerful and cost
effective total machine management system displays for a wide variety of vehicle applications.
PLUS+1
®
controller products utilize modular designs wherever possible. This modularity extends to
product housings, connectors and control circuitry.
SC Controller Family
The SC0XX-1XX Controller Family has been certified as SIL 2 Capable. This means it is suitable for use in
critical applications up to and including Safety Integrity Level 2. The SIL Rating reflects the level of risk
reduction that the device can provide when used as part of a safety instrumented system.
The third party assessment and certification verifies that the product hardware and software design, the
safety manual, as well as the processes that are used for development, testing, configuration
management, quality control, etc., comply with the 250+ requirements of the IEC 61508 international
standard.
Use of certified devices makes it much easier to design and implement a safety system. It can significantly
reduce cost over the long term and provides an important measure of quality and reliability.
24 and 50 Pin SC Controllers
P200147
The SC Controller Family comes in the same sized blue housing.
These modules communicate with one another and other intelligent systems over a machine Controller
Area Network (CAN) data bus. PLUS+1
®
hardware products are designed to be equally effective in a
distributed CAN system, with intelligence in every node, or as stand-alone control for smaller machine
systems. PLUS+1
®
systems are incrementally expandable: additional modules can be easily added to the
machine CAN bus to increase system capabilities or computational power.
Technical Information
PLUS+1 SC0XX-1XX Controller Family
Overview
6 |
©
Danfoss | June 2016
L1415500 | BC00000235en-US0201