Do not remove device type label caution warehouse topic
C
Caution
The device type label contains important information and should not be removed. Solvents can destroy
the label imprint.
Do not contact the type label with any solvent-containing substance.
Intended use
W
Danger
The CS500 operates using radio signals and cellular networks and is not authorized for use in safety-
related applications due to possible deficient data transmission.
Deficient network coverage, failure, or malfunction of the device may lead to deficient data transmission.
Due to this, connection cannot always be guaranteed under all conditions.
•
Do not operate the device in machines and applications where life depends on the proper operation
of this piece of equipment.
•
Never rely solely upon any wireless device for essential communications.
•
This device is designed to be used in systems which must be checked for conformity with legal
requirements prior to placing into operation. The integrator of this device is responsible to check and
comply with regional directives and requirements.
The OEM of a machine or vehicle in which PLUS+1
®
or other electronic controls are installed has the full
responsibility for all consequences that may occur.
•
Danfoss has no responsibility for any consequences (direct or indirect) caused by failures or
malfunctions.
•
Danfoss has no responsibility for any accidents caused by incorrectly mounted or maintained
equipment.
•
Danfoss does not assume any responsibility for PLUS+1
®
products being incorrectly applied or the
system being programmed in a manner that jeopardizes safety.
•
All safety critical systems shall include an emergency stop to switch off the main supply voltage for
the outputs of the electronic control system. All safety critical components shall be installed in such a
way that the main supply voltage can be switched off at any time. The emergency stop must be easily
accessible to the operator.
•
A system FMEA should be performed on all applications.
The CS500 is designed for transmitting data that is available within a CAN network via 4G/3G/2G.
The CS500 is suitable for use in mobile and stationary systems for industrial, agricultural, construction
and forestry machinery.
CS500 devices are IP 67-rated: They are protected against ingress of dust and against water jets against
the enclosure (tested under defined conditions of pressure and time). IP 67 protection is only ensured
when all connectors are plugged in and unused connector pin positions have sealing plugs installed.
Service and support
Contact PLUS+1
®
Support and Services:
The most recent driver, firmware, tools and documentation versions are available for download from
https://www.danfoss.com/en/products/software/?sort=default_sort
Technical Information
PLUS+1® Connect CS500 IoT Gateway
Device Elements
©
Danfoss | October 2021
BC397226723595en-000101en-000101 | 7
