The bottom plate can be mounted before or after sliding in the MCF 106. When the MCA 121 is installed (bottom entry) either the bottom plate or the
the fieldbus cables must be disconnected during commissioning in order to make it possible to use the guide. This is illustrated in the following figure.
130BB100.10
Illustration 4.4: Installation with MCA 121 EthernetIP. When the EthernetIP cables are disconnected the guide can be used to slide the MCF 106 into
place or out for commissioning.Another possibility is to remove the bottom plate during commissioning.
MCF 106 A/B in C Option Adaptor Instruction
4 How to Install
MI.38.F1.02 - VLT
®
is a registered Danfoss trademark
13
4
