10
2019.09
VIFZL55X
Danfoss Heating Solutions
Installation Guide Danfoss Link™ HC
?
7
Actuator Settings
Select type / OK
5.5
Configuring a room
?
1
Configure Room
Heating regulation
?
2
Heating Regulation
Select type
Forecasting method:
By activation of the forecast
method, the system will auto-
matically predict the heating
start-up time necessary to
reach desired room tempera-
ture at desired time.
5.6
Performing a network test after adding new devices
After finishing installation, perform a network test to ensure that communication between added
devices and the Danfoss Link CC™ is stable.
Note!
Do not perform the network test before the Danfoss Link
™
CC is mounted in its final position.
?
1
Service Options
Status and Diagnostics
?
2
Status and Diagnostics
Network
?
3
Wireless Network Status
Start Network Test
At the end of the network test the Danfoss Link™ CC awaits for all battery operated devices to wake
up and report. Follow the instructions given on the screen. If the network test is running smoothly,
there will be no need for further interaction. If the network test is performing slow, the Danfoss Link™
CC guides through troubleshooting and gives useful tips for speeding up the process.
5.7
Leaving the service area in Danfoss Link™ CC
Press the
SETUP
pin for 3 seconds and put back the front cover to the Danfoss Link™ CC.
6. Maintenance
6.1
Removing an output
?
1
Service Options
Rooms and Devices
?
2
Rooms and Devices
Manage Devices
?
3
Select Room
Select existing room