Danfoss KP Series Instructions Download Page 1

Page: 1 / 4

Danfoss

A/S

RI.5D.A2.22

→

DKRCC.PI.C0A.A1.22-520H2749

Pressure Controls

KP 61

→

KP 61, 62, 63, 68, 69 vapor charge
KP 71, 73, 75, 77, 79, 81 adsorption charge (cross ambient)

Types

Auto reset

Manual reset

Auto reset

(w/o hand knob)

w/ hand switch

Bulb types

Mounting requirement

Vapor charge

Max. bulb temperature

Ambient temperatures

Enclosure

CAUTION: The mounting panel must be plane to avoid damage of control.

Cable entry

Required cap. tube length on evaporator

80 in. cap. tube: min. 16 in.
196 in. cap. tube: min. 22 in.

060R9748

INSTRUCTIONS

Summary of Contents for KP Series

Page 1: ...Types Auto reset Manual reset Auto reset w o hand knob w hand switch Bulb types Mounting requirement Vapor charge Max bulb temperature Ambient temperatures Enclosure CAUTION The mounting panel must be...

Page 2: ...ise Bellows movement on pressure drop The free terminal can be used for signal purpose Load Option B CUT OUT on temperature rise Wire terminals 1 2 CUT IN Low Set Point LSP see Setting CUT OUT High Se...

Page 3: ...decrease turn CCW use adjustment knob use adjustment knob or screwdriver Determination of differential For KP w vapor charge and auto reset KP 61 KP 62 KP 63 KP 68 KP 69 Use graphs to determine correc...

Page 4: ...fferential see Determination of differential HIGH SET POINT minus DIFFERENTIAL equals LOW SET POINT HIGH SET POINT minus DIFFERENTIAL equals LOW SET POINT Example Example HSP DIFF LSP HSP DIFF LSP 45...