Danfoss does not take responsibility of an incorrect installation, interferences produced by collision of frequencies, nor of the
management of the working frequencies in fixed facilities, where several radio remotes systems, share or can share, the same zone
or working area.
W
Warning
Proceed with caution; the equipment may not be connected correctly which may lead to unforeseeable movements on starting-
up. Make sure that the crane is stopped for the entire duration of the assembly process, keep the work area free and wear
protective clothing.
To guarantee the specified autonomy it is necessary to use AAA LR03 (x4) alkaline batteries with nominal capacities between 900
and 1155 mAh. It is highly recommended to use brands with + type or similar with nominal capacities close to 1155 mAh.
Rechargeable batteries are NOT recommended, as its nominal capacity is lower than the desired one.
Description
Legend:
1. Status LED
2. Feedback LEDs
3. START Button
4. STOP Button (if no STOP option)
5. STOP Pushbutton Option
6. Hook attachment
7. Removable EEPROM module
8. Alkaline batteries
Installation Guide
ikompact
Remote Control
©
Danfoss | March 2020
AN312055927725en-000102 | 1
