background image

2. Place the batteries in the compartments of the battery charger.

3. Optional: If charging multiple batteries, wait at least 5 seconds before placing the second battery in

the other compartment.

Possible damage to battery!

Be sure to charge batteries in environments with temperatures over 0° C.

CB70 status LEDs

Each battery compartment has an LED that indicates the status of the batteries' charge.

Green LED; pulsing

Battery is excessively depleted

Green LED; continuous

Normal charging operation mode

Green LED; off

Battery charging process is complete

The battery charger must be placed and used out of the danger area.

Battery Charging Recommendations

The battery lifespan is estimated to 500 recharging cycles and is largely dependent on the conditions of

use. To maximize the lifespan of the batteries and battery charger, follow these recommendations:

Do not recharge the battery until it is completely flat, as shown with red LED slow pulse on the
transmitter

Always charge the batteries at temperatures between 0° and 45°C (the batteries will not become fully
charged at temperatures exceeding 45°C)

Do not leave the battery charger or batteries in a direct sunlight

Charge batteries at least once every six months

Avoid short circuits between the battery contacts; do not carry charged batteries in toolboxes or next
to other metal objects (keys, coins, etc.)

Always keep contacts clean

Caution! Risk of Explosion if Battery is Replaced by an incorrrect type. Non Danfoss Battery use may
void warranty

User Manual

Remote Control IK4 Transmitters

Charger and battery

 

©

 Danfoss | May 2021

BC290863558440en-000201 | 13

Summary of Contents for IK4
















Reviews: