Danfoss iC7-Marine PROFINET, Operating Manual, Page: 24 / 42

3
Fieldbus Cable Connections
3.1
Prerequisites for Installation
Communication interfaces are integrated in the control board in iC7 drives and power converters.
The position of the connections differs based on the control board concept and frame, for example. For more information on the location
of the connections, cabling, and shielding, refer to the product-specific design guide.
3.2
Communication Interface X1/X2 in Frames FA02–FA12
The communication interface is on the top of the frequency converter as shown in Figure 6 . Industrial-grade RJ45 connectors are
recommended for optimal connection. A combined shield/fixing plate, the Fieldbus EMC plate, is available as an accessory to strengthen
the mechanical fixation of the cables.
e3
0b
i5
69
.1
0
X1X2
Figure 6: Location of the Communication Interface, X1/X2 in FA02-FA12 Frames (with the Optional EMC Plate)
3.3
Communication Interface X1/X2 in Frames FK06–FK12
The communication interface ports are located inside the frequency converter. The position of the ports and the recommended wiring
path are shown in
Figure 7 and Figure 8 .
24
| Danfoss Drives Oy © 2024.04 AQ481922043454en-000101 / 172K4282A
Operating Guide | iC7-Marine PROFINET