background image

Danfoss Heating

5

GB

MK.9 or SET

 

The FP975 is supplied fi tted with a Danfoss Randall SET wallplate. 
However the FP975 will also mount directly onto a Danfoss Randall 
MK.9 wallplate without the need for wiring changes. However when 
used with existing MK.9 wallplates the left hand switch must be set 
in the MK.9 position to re-confi gure the time control to match MK.9 
wiring connections.

PUMPED or GRAVITY

When this switch is in the 

PUMPED

 position the Heating and Water 

outputs are 

UNLINKED

. When in the 

GRAVITY

 position the Water 

output is 

LINKED

 to the Heating output so that whenever the 

Heating is 

ON

 the Water will also be 

ON

 regardless of the Water 

programme.

Place the switch in the 

PUMPED

 position if the system being 

controlled is a) fully pumped with a mid-position valve, b) fully 
pumped with a two port zone valve in each circuit, c) 

GRAVITY

 

Hot Water, 

PUMPED

 Heating with a two port zone valve with SPDT 

auxiliary switch in the gravity primary circuit (and wired in accordance 
with diagrams on pages 9-10).

Place the switch in the 

GRAVITY

 position if the system being 

controlled is a) fully pumped, but with only a single two port zone 
valve in the Heating circuit, b) 

GRAVITY

 Hot Water, 

PUMPED

 Heating 

with no zone valves.

7 Day, 5/2 Day or 24 Hour

When both switches are in the 

7 DAY

 position each day of the 

week may be programmed with diff erent 

ON/OFF

 times. When the 

switch is in the 

5 DAY/2 DAY

 position, weekdays (Mon-Fri) can be 

programmed with one set of 

ON/OFF

 times, and weekends (Sat-Sun) 

can be programmed with a diff erent set. When both switches are in 
the 

24 hour

 position the same set of times will be repeated in every 

24 hour period.

3.2 New Installation

1.  Fix the wallplate to the wall or plaster box as required.
 When 

fi xing the wallplate note that the terminals are at the top, 

and the vertical centre line of the unit lies between terminals N 
and L.

2.  Surface cables can only enter from below the unit. If mounted on 

a plaster box, cables can enter from the rear through the aperture 
in the wallplate.

For latest prices and delivery to your door visit MyTub Ltd - 0845 303 8383 - www.mytub.co.uk - [email protected]

Summary of Contents for FP975

















Reviews: