background image

4

DIL Switch Settings

DIL switch settings

Before mounting the unit, ensure the 4 DIL switches on the rear of 
the unit have been moved to the required settings.

MK.9 or SET

 

The FP975 is supplied fi tted with a Danfoss Randall SET wallplate. 
However the FP975 will also mount directly onto a Danfoss Randall 
MK.9 wallplate without the need for wiring changes. However 
when used with existing MK.9 wallplates the left hand switch 
must be set in the MK.9 position to re-confi gure the time control 
to match MK.9 wiring connections.

PUMPED or GRAVITY

When this switch is in the 

PUMPED

 position the Heating and 

Water outputs are 

UNLINKED

. When in the 

GRAVITY

 position the 

Water output is 

LINKED

 to the Heating output so that whenever 

the Heating is 

ON

 the Water will also be 

ON

 regardless of the 

Water programme.

Place the switch in the 

PUMPED

 position if the system being 

controlled is a) fully pumped with a mid-position valve, b) fully 
pumped with a two port zone valve in each circuit, c) 

GRAVITY

 

Hot Water, 

PUMPED

 Heating with a two port zone valve with 

SPDT auxillary switch in the gravity primary circuit (and wired in 
accordance with diagrams on pages 10-11).

RIGHT

LEFT

TOP

7 D

A

Y

MK.9

5/2 D

A

Y

SET

PUMPED

GRA

VITY

Summary of Contents for FP975





































Reviews: