Danfoss Ltd
Ampthill Road
Bedford, MK42 9ER
Tel: 01234 364621
Fax: 01234 219705
Email: [email protected]
Website: www.heating.danfoss.co.uk
V1_12/14
User Overrides
Sometimes you may need to change the way you use your heating
temporarily, e.g. due to unusually cold or warm weather. The FP735Si has
several user overrides, which can be selected without affecting the set
programmes. When user overides are active, the hand symbol will flash to
indicate a manual change is active.
Move to the next event
Press the
V
button to move forward to the next event for the selected channel.
Pressing the
V
button again to return to programmed operation.
Extend the current heating period by 1, 2 or 3 hours
Whilst the heating is on press the
V
button once to extend the heating time for
the selected channel by 1 extra hour, twice for an extra 2 hours, and 3 times for
an extra 3 hours, pressing the
V
button a fourth time will remove the override.
Service Interval Timer
r
If the property is owned by a landlord, they may, for gas safety reasons, have
instructed the installer to set the service interval timer.
If set, a visual and audible warning will alert you that the boiler will need
servicing within the next 28 days. This warning is repeated each day at noon.
If the boiler is not serviced within 28 days, the daily audible warning will sound
continuously and can only be cancelled by pressing any button on the unit.
In addition, all overrides and programming buttons will be disabled and the
heating and hot water may only operate for a limited amount of time in each
hour or not come on at all depending on the installer settings.
As this is a gas safety feature only an installer can reset the service interval
timer, this will be done as part of the boiler service.
Channel Status
(Event number when programming)
Channel Number
TIME
Days of Week (Numbers or Text)
KEY TO SYMBOLS
Flame: shows when heating is on
Hourglass: shows during programming delays
Padlock: indicates keyboard is locked
Suitcase: indicates Holiday Mode is set
Clock: Timed Modes
Hand: Manual Modes
Alarm: Indicates alarm is active.
Also used for service due
3 on and 3 off events per day
2 on and 2 off events per day
1 on and 1 off event per day. All Day Mode
Timer (OFF) Mode
+ HRS: Extends function by 1, 2 or 3 hours
Timer (ON) Mode
Display
