![background image](http://html1.mh-extra.com/html/danfoss/fp735si/fp735si_user-manual_3464707014.webp)
FP735SI
14
GB
1.7.4 Programming in 24 hour mode
(Every day of the week uses the same programme)
a) Press the
PROG
button until event 1 fl ashes
(Fig. 17)
.
b) Amend the time as follows:
i)
Press
the
+
and
–
buttons to alter the time (press and hold to
move in 10 minute increments).
ii)
Press
the
NEXT
button to advance to the next event
(Fig. 18)
.
iii) Repeat the steps above for the remaining events.
c) When all events are programmed press the
PROG
button to
return to
RUN
mode
(Fig. 19)
.
1.7.5 Programming in A+B mode
(The Advanced Programming parameter 6
must be set to 5+2 days)
Press and hold the
PROG
and
V
buttons for 3 seconds.
The display will change to that shown in
Fig. 20
. This
will take you into
Advanced Programming Mode
option 1.
Use the
Λ
or
V
buttons to enable or disable the
function (1=enabled, 0=disabled).
Fig. 20
Fig. 17
Fig. 18
Fig. 19