7
Service Interval Timer
The FP715 Si is fi tted with an installer setback service interval
timer. If this feature is required please contact our technical
department. Setting instructions for this gas safety feature are
only available to bona fi de heating installers.
To use the AB copy function – press the
PROG
button:
This will show the “A” days, with all the days selected.
1.
Use the
2.
DAY
button to highlight a day.
Subsequent presses of the
3.
DAY
button will increment
through the days.
Press the
4.
+
button to select a specifi c day as an “A” day, or
press the
–
button to specify a day as a “B” day.
Once the day has been selected as an “A” or “B” day the
5.
programme will automatically jump to the next day.
When the last day of the week is active, pressing
6.
+
,
-
, or
DAY
will move back to the “A” days displayed with no selected
(fl ashing) days (see image below).
Repeat 2 to 6 until all selections have been made.
7.
When selections are completed, press the
8.
PROG
button to
move to event programming.
Event Programming in AB mode
Programme “A” day events using the
1.
+
(time advance),
-
(time
decrease), and
NEXT
(next period) buttons.
Press the
2.
DAY
button to change to programme the “B” days
Programme “B” day events using the
3.
+
(time advance),
-
(time
decrease), and
NEXT
(next period) buttons.
A Days
B Days
Mon Tues Thurs Fri Sat
Wed Sun
DIL switch settings and A
d
v
anc
ed P
rogr
amming Options
Summary of Contents for FP715Si
Page 33: ...33 No Hot Water 0 1 2 No Heating 3 4 4 4 0 1 2 Fault Check List Troubleshooting...
Page 34: ...34...
Page 35: ...35...
