9
Produced by Danfoss Floor Heating Hydronics 05.2011
VI.CU.C2.02
Instruction FH-CWP Thermostat
• Press Fig. 1
to accept this setting.
• Use Fig. 1
to select the required temperature.
• Press Fig. 1
to accept this setting.
Program 1, Event 2-4:
Repeat the Event 1 procedure for programming Event
2-4.
Program 2:
Sa. Su. are now shown in the display.
Program 2, Event 1:
• Use Fig. 1
to select the required start time.
• Press Fig. 1
to accept this setting.
• Use Fig. 1
to select the required temperature.
• Press Fig. 1
to accept this setting.
Program 2, Event 2-4:
Repeat the Event 1 procedure for programming Event
2-4.
The thermostat will continue the 4-event pro-
gramme based on the present time and day.
Temporarily Setting and Changing the Desired
Room Temperature
• Press or Fig. 1
anytime to change the
desired room temperature value,
is shown
Summary of Contents for FH-CWP
Page 1: ...Instruction FH CWP Thermostat...
Page 20: ...www heating danfoss com...