13-51 SL Controller Event
Array [20]
Option:
Function:
[70]
SL Timeout 3
[71]
SL Timeout 4
[72]
SL Timeout 5
[73]
SL Timeout 6
[74]
SL Timeout 7
[75]
Start command given
[76]
Digital input x30 2
[77]
Digital input x30 3
[78]
Digital input x30 4
[79]
Digital input x46/1
[80]
Digital input x46/3
[81]
Digital input x46/5
[82]
Digital input x46/7
[83]
Digital input x46/9
[84]
Digital input x46/11
[85]
Digital input x46/13
13-52 SL Controller Action
Array [20]
Option:
Function:
[0]
*
DISABLED
Select the action corresponding to the SLC
event. Actions are executed when the
corresponding event (defined in
) is evaluated as true. The
following actions are available for selection:
*DISABLED
[0]
[1]
No action
No action
[1]
[2]
Select set-up 1
Select set-up 1
[2] - changes the active set-up
(par. 0-10) to ‘1’.
If the set-up is changed, it will merge with
other set-up commands coming from either
the digital inputs or via a serial communi-
cation bus.
[3]
Select set-up 2
Select set-up 2
[3] - changes the active set-up
(par. 0-10) to ‘2’.
If the set-up is changed, it will merge with
other set-up commands coming from either
the digital inputs or via a serial communi-
cation bus.
[4]
Select set-up 3
Select set-up 3
[4] - changes the active set-up
(par. 0-10) to ‘3’.
If the set-up is changed, it will merge with
other set-up commands coming from either
the digital inputs or via a serial communi-
cation bus.
[5]
Select set-up 4
Select set-up 4
[5] - changes the active set-up
(par. 0-10) to ‘4’.
13-52 SL Controller Action
Array [20]
Option:
Function:
If the set-up is changed, it will merge with
other set-up commands coming from either
the digital inputs or via a serial communi-
cation bus.
[10]
Select preset
ref 0
Select preset reference 0
[10] – selects preset
reference 0.
If the active preset reference is changed, it
will merge with other preset reference
commands coming from either the digital
inputs or via a serial communication bus.
[11]
Select preset
ref 1
Select preset reference 1
[11] – selects preset
reference 1.
If the active preset reference is changed, it
will merge with other preset reference
commands coming from either the digital
inputs or via a serial communication bus.
[12]
Select preset
ref 2
Select preset reference 2
[12] – selects preset
reference 2.
If the active preset reference is changed, it
will merge with other preset reference
commands coming from either the digital
inputs or via a serial communication bus.
[13]
Select preset
ref 3
Select preset reference 3
[13] – selects preset
reference 3.
If the active preset reference is changed, it
will merge with other preset reference
commands coming from either the digital
inputs or via a serial communication bus.
[14]
Select preset
ref 4
Select preset reference 4
[14] – selects preset
reference 4.
If the active preset reference is changed, it
will merge with other preset reference
commands coming from either the digital
inputs or via a serial communication bus.
[15]
Select preset
ref 5
Select preset reference 5
[15] – selects preset
reference 5.
If the active preset reference is changed, it
will merge with other preset reference
commands coming from either the digital
inputs or via a serial communication bus.
[16]
Select preset
ref 6
Select preset reference 6
[16] – selects preset
reference 6.
If the active preset reference is changed, it
will merge with other preset reference
commands coming from either the digital
inputs or via a serial communication bus.
[17]
Select preset
ref 7
Select preset reference 7
[17] - selects preset
reference 7.
Parameter Descriptions
FC 300 Programming Guide
MG.33.MA.22 - VLT
®
is a registered Danfoss trademark
3-117
3
3