Danfoss ET9650, Operator'S Manual

Page: 8 / 64

•
persons working on the machine/unit are adequately qualified;
•
persons working on the machine/unit are suitable for operating
the machine/unit;
•
the Operation Manual has been read and understood. One hard-
copy of the Operation Manual must always be kept at a desig-
nated place where the machine/unit is used.
•
persons working on the machine/unit are aware of potential
risks;
•
the operating staff is familiar with the location as well as with op-
erating the fire alarm and fighting means. Free access to this
equipment must be ensured.
•
personal protection equipment is worn (safety footwear, protec-
tion gloves and safety glasses).
Machine/unit fitters
Machine/unit fitters must be at least 18 years old and have completed
training for the task, i.e. they must have attended a specialist voca-
tional training.
A fitter
•
must observe the instructions in the Operation Manual;
•
must inform the owner on failures and damage.
Operator
An operator is a person charged with and instructed in the proper op-
eration of the machine/unit by the owner or the otherwise contractu-
ally obliged person.
The operator
•
must observe the instructions in the Operation Manual;
•
must inform the owner on failures and damage.
•
must not perform and maintenance or repair work on the ma-
chine/unit.
1.2 Storage
The Operation Manual is part of the machine/unit and must be kept
near the machine/unit at all times. Upon disposal of the machine/unit,
the Operation Manual must also be handed over.