Danfoss ET9650, Operator'S Manual

Page: 10 / 64

2 Safety instructions
2.1 Presentation of warnings
Warning notes in the Operation Manual warn against risks involved
with the handling of the machine/unit. Risk levels are identified as fol-
lows:
The signal word HAZARD identifies an imminent hazard resulting in
serious injuries or death. This warning is supplemented by a triangu-
lar hazard symbol.
The signal word WARNING identifies a potentially hazardous situa-
tion, which might result in serious injuries or death. This warning is
supplemented by a triangular hazard symbol.
The signal word CAUTION identifies a potentially hazardous situa-
tion, which might result in light injuries. This warning is supplemented
by a triangular hazard symbol.
The signal word ATTENTION identifies a potentially hazardous situa-
tion, in which the product or property in the environment may be dam-
ages. This warning is supplemented by a hazard symbol or a excla-
mation mark.
2.2 Intended use
This machine is intended for industrial use; it is only suitable for cut-
ting pneumatic and hydraulic hoses up to a specific permissible dia-
meter, see “Technical Data” in Section 3.
Intended purposes include:
•
Single user workplace for one person only
•
Manual input and retrieval
•
Operating temperatures between 5 °C and 40 °C
•
Operation in a closed operation room
•
The machine must not be operated by persons not capable of
operating the machine without any risk. These may include:
➢
persons with physical or mental disabilities;
➢
children and persons under age;
HAZARD!
WARNING!
CAUTION!
ATTENTION!