5.3 Work piece cutting
5.3.1 Prerequisites
ATTENTION!
Damage to the machine
The knife may be damaged when the machine is operated wit-
hout hose prestressing.
• Never cut without bending (X).
• Adjust the bending pin and the workpiece.
Prerequisites for a correct cutting process:
•
The bending pin position and the hose diameter are matched to
each other:
–
(1) Large hose diameter = large bolt distance
–
(2) Small hose diameter = small bolt distance
Summary of Contents for ET9400
