ET9000-45-110 Hydraulic hose saw instruction manual
6 | © Danfoss | Produced by Danfoss A/S | 2021.09
Maintenance
Examine the blade periodically (blade cover in place) for chipping
and cracking. Occasionally pull the blade cover off and perform a
closer inspection of the blade paying attention to any cracks that
may have occurred. If cracks are observed, the blade should be
thrown away as it could break while spinning. Cracks are very rare
as these blades are high quality steel and are tempered to the
correct hardness for this application. With the cover off, clean the
hose dust that has accumulated inside.
Keep the area around the saw uncluttered.