Reassembly of the EH valve
If the EH valve has the PVFC spool (18) option,
make sure it is lubricated with a thin film of oil.
Carefully insert the spool (18) into the bore. Ensure
that only minimal force is applied by your fingers.
Screw the PVFC retainer hexagonal plug (16) into
the housing with a 5 mm Allan key and tighten.
Remember to lubricate the O-ring with light
weight grease.
Make sure that the main directional spool (2) is
lubricated with a thin film of oil. Carefully insert the
spool (2) into the bore held by the spring end and
ensure that only minimal force is applied by hand.
Service Manual
EH Electro Proportional Hydraulic Valve In-line Version
Reassembly
14
L1026660 • Rev BA • Mar 2014
