Danfoss ECtemp™ Smart
5
Installation Guide
Frost protection
temperature
5 °C to +9 °C (default 5 °C)
Temperature range
Room temperature: 5-35 °C.
Floor temperature: 5-45 °C.
Max. floor: 20-35 °C (if unrecov-
erable seal is broken then up
to 45 °C). Min. floor: 10-35 °C,
only with combination of room
and floor sensor.
Sensor failure monitoring
The thermostat has a built-in
monitoring circuit, which will
switch off the heating if the
sensor is disconnected or
short-circuited
Cable specification max.
1x4 mm
2
Ball pressure test temperature
75 °C
Pollution degree
2 (domestic use)
Controller type
1C
Software class
A
Storage temperature
-20 °C to +65 °C
IP class
21