Installation instruction
ECtemp 850 IV
08097083 / VIMHE202
18 | © Danfoss | 2019.07
Installation of ground system
The installation of a ECtemp 850 with
1 ground
system has been selected.
It is optional if the sensors are connected to the ECtemp 850 before power on or dur-
ing the installation.
The system uses the output
System A.
If sensors for
System A
are not connected — do it now!
Press
or wait…
CONNECT SENSORS:
SYSTEM A
System is being scanned to find type of connected
sensors…
SYSTEM A
SCANNING...
Select system type: Ground.
SYSTEM TYPE:
GROUND
Wait until correct number of sensors for
System A
is found.
3 GROUND SENSOR
FOUND. ACCEPT?
Press
when all sensors are found…
System A
is installed…
SYSTEM A!
INSTALLED
System is being checked…
CHECKING SYSTEM
<-------->
Press
to configure
System A
(naming sensors
and changing factory settings).
CONFIG SYSTEM:
SYSTEM A
Please refer to “Changing parameters and performance of systems” in “User Manual”
for description of the configurable parameters.
If for some reason you do not wish to configure the system now you can press
to skip configuration of system.
Press
to end configuration.
PRESS
TO END
CONFIGURATION.