How to enter the basic configuration settings
1. Press and hold the button for 12 seconds
until “COdE” appears.
2. Turn the button clockwise until “0044”
appears.
3. Press the button once to confirm.
Network: How to specify whether you want to connect
this thermostat with other thermostats in a network
Please note that the slave units must be connected to the
master unit using the devinet terminals.
1. Define the thermostat as independent, master or
slave unit.
To define this unit as an independent
unit or if network is not used, choose
ALO.
To define this unit as the master unit in
the network, choose MAS.
ECtemp 550
Installation Guide
15
