Danfoss ECL Comfort 100M, User'S Manual And Installation Instructions

Page: 10 / 21

16
16
17
17
Set a maximum fl ow temperature to protect your heating
sys tem from getting overheated.
The running time of the motorized valve is the time it takes
the valve to move from closed to fully open position.
Select the running time of the motorized valve that suits you
best. The running time is defi ned as:
Valve stroke (mm) X actuator speed (sec./mm) = running
time.
If the thermo actuator is selected for switch 5, the setting of
switch 4 will be disabled.
Select the gear motor or thermo actuator, depending on what
is used in your heating system.
Set the slave address of the controller, if it is a part of a
mas ter/slave system. Set the address of the ECA 60/61, if it is
connected. See also page 32.
Switch 4: Running time of the motorized valve
Switch 4 Running time Your setting
OFF 20 sec.
ON 120 sec.
Switch 3: Maximum fl ow temperature limit
Switch 3 Max. fl ow temperature Your setting
OFF 45 ºC
ON 90 ºC
Switch 5: Gear motor/thermo actuator
Switch 5 Actuator type Your setting
OFF Thermo actuator
ON Gear motor
Switches 6, 7 and 8: Addressing and time unit
selection
Switch 6 Switch 7 Switch 8 Slave
address
Clock Your
setting
OFF OFF OFF 0 built-in
ON OFF OFF 1 built-in
OFF ON OFF 2 built-in
ON ON OFF 3 built-in
OFF OFF ON 4
ECA 60/61
address A
ON OFF ON 5
ECA 60/61
address B
Set a maximum fl ow temperature to protect your heating
sys tem from getting overheated.
The running time of the motorized valve is the time it takes
the valve to move from closed to fully open position.
Select the running time of the motorized valve that suits you
best. The running time is defi ned as:
Valve stroke (mm) X actuator speed (sec./mm) = running
time.
If the thermo actuator is selected for switch 5, the setting of
switch 4 will be disabled.
Select the gear motor or thermo actuator, depending on what
is used in your heating system.
Set the slave address of the controller, if it is a part of a
mas ter/slave system. Set the address of the ECA 60/61, if it is
connected. See also page 32.
Switch 4: Running time of the motorized valve
Switch 4 Running time Your setting
OFF 20 sec.
ON 120 sec.
Switch 3: Maximum fl ow temperature limit
Switch 3 Max. fl ow temperature Your setting
OFF 45 ºC
ON 90 ºC
Switch 5: Gear motor/thermo actuator
Switch 5 Actuator type Your setting
OFF Thermo actuator
ON Gear motor
Switches 6, 7 and 8: Addressing and time unit
selection
Switch 6 Switch 7 Switch 8 Slave
address
Clock Your
setting
OFF OFF OFF 0 built-in
ON OFF OFF 1 built-in
OFF ON OFF 2 built-in
ON ON OFF 3 built-in
OFF OFF ON 4
ECA 60/61
address A
ON OFF ON 5
ECA 60/61
address B