DEVIreg™ 850 IV
Installation instruction
18
Installation of combi system
The installation of a DEVIreg™ 850 with
1 roof
and
1 ground
system has been selected.
It is optional if the sensors are connected to the DEVIreg™ 850 before power on or during
the installation.
The first installed system (
System A
) is using the output
System A
.
The second installed system (
System B
) is using the output
System B
.
It is freely selectable if System A should be the roof or ground system. However it is
preferable that System A is the roof system, since System A is shown on the upper line
of the display. Please refer to the description of the Display and Combined view in the
user manual.
If sensors for
System A
are not connected — do it now!
Press
or wait…
CONNECT SENSORS:
SYSTEM A
System is being scanned to find type of connected
sensors…
SYSTEM A
SCANNING...
Select system type: Roof (if roof system is preferred
as
System A
)
SYSTEM TYPE:
ROOF
Wait until correct number of sensors for
System A
is found.
1 ROOF SENSOR
FOUND. ACCEPT?
Press
when all sensors are found…
System A
is installed…
SYSTEM A!
INSTALLED
If sensors for
System B
are not connected — do it now!
Press
or wait…
CONNECT SENSORS:
SYSTEM B
System is being scanned to find type of connected
sensors…
SYSTEM B
SCANNING...
Wait until correct number of sensors for
System B
is found.
SYSTEM TYPE:
GROUND
Press
when all sensors for
System B
are found…
3 GROUND SENSORS
FOUND. ACCEPT?
