Danfoss Heating
7
GB
1.3 Before you start
Open the fl ap on the front of the clock. Press the
RESET
button using
a non-metallic object (e.g. pencil/matchstick) until you hear a click
and the 2 red lights on the front of the unit fl ash once.
This will stop and restart the electronics,
without losing the factory set time and
date settings.
To fully reset the unit see page 19.
1.4 Choice of 24hr or AM/PM display
Press and hold
DAY/HOL and NEXT ON/
OFF
for 1.5 seconds to toggle between
24hr clock and AM/PM display, as
required.
1.5 Setting the Date and Time
These settings are made during
manufacture and only need to be
changed in the unlikely event that the
unit has lost the settings.
Setting the Date
Press and hold
PROG
for 5 seconds to
display year.
Use the
+
or
-
buttons to set the correct
year.
DAY/HOL
DAY/HOL
DAY/HOL
DAY/HOL
