6
Instruction CF-RU Repeater Unit
VI.UH.N3.80
Produced by Danfoss Floor Heating Hydronics 01.006
3. Placing and Mounting
The Repeater Unit has been assigned
When the Repeater Unit has been assigned to the Master Controller, discon-
nect it from the temporary 0V power supply outlet
•
Place it somewhere between the Master Controller and the Room
Thermstat (with the unsatisfactory link test) – see fig. – and connect it to
a 0V power supply outlet
•
Verify the transmission to the Master Controller by making a link test from
the Repeater Unit – see
•
Perform another link test from the Room Thermostat with 1) the
unsatisfactory link test or ) where system enlargement is required
Note: Extending the transmission range of the CF2 system
•
Up to three Repeater Units can be installed in a chain – see fig.
•
Several chains of Repeater Units can be added to one Master Controller
– see fig.
Summary of Contents for CF-RU
Page 34: ...Fig 1 Fig 2 Fig 3 A1...
Page 36: ...088N2465 06 01 2006 Version 03...