Instruction
Disassembling and assembling APP S 2.0-3.5 / APP S 674 2.0-3.5
11
180R9281 / 521B1275 / DKCFN.PI.013.C4.02 / 10.2015
20. Lubricate and place two bolts in end flange.
Turn each bolt one round at a time to
ensure mounting flange is mounted as
straight downwards as possible. Be careful
not to squeeze the O-ring.
21. Screw in the rest of the bolts and tighten
all screws to a torque of 30 ± 3 Nm.
24. Position the shaft seal distance ring.
23. Remove old O-ring and place the new one
on shaft seal cover.
22. Lubricate and press new ceramic ring into
the shaft seal cover by using the press bush
tool.
WARNING:
Ensure that the face with rubber seal is
positioned against shoulder in shaft seal
flange.
