AK-CS
User Guide
8
lit. no.
Usco.ei.rF0.A3.22.001 / 521U0146
iP address = iP address of connected AK-cs
User name = akcs
Password = danfoss
navigate & locate saved (viz) file
navigate & locate saved (Jpeg) file
the Jpeg version of the graphic must also have
the same file size
8/ Observe progress of file transfer
After clicking the oK button the download will commence. observe the progress at the bottom of the rMt tool. Upon correct
download a message will appear informing of successful transfer,
clicking on the site View key on the AK-cs will now reveal the graphic. Any mapped parameters will automatically update and refresh.
Using the FtP tool
Built in to the rMt tool is an FtP service. FtP (File transfer Protocol) is a file transfer protocol for exchanging and manipulating files over
a tcP computer network. FtP is used when updating files (HtMl / eDF) to the AK-cs. the following description highlights the steps in
using the FtP tool in transferring files to the AK-cs
Address Book
(select an iP address from the address book)
or enter a valid iP address
Directory of AK-cs
FtP connect / Disconnect on
AK-cs
FTP Port
= 21 (factory standard)
but user selectable)
local Pc directory
User Name
= akcs
(lower case)
Password
= danfoss
(lower case)
Web server Port
= 80 (factory standard)
but user selectable)
status / transfer progress window