1. Carefully inspect each surface of the swashplate for wear. All swashplate surfaces should be smooth.
Inspect the swashplate’s slipper running surface for brass transfer. Excessive brass transfer from
slippers may indicate that the slippers should be replaced.
2. Check the swashplate bearing journal for scratches. Replace the swashplate if necessary.
P109047
B040
Displacement Limiter
Inspect the displacement limiter screw threads (L040). Ensure that the screw is not bent. Also, inspect
the seal/nut (L030) for irregular wear. Replace if necessary. Replace the O-ring (L010A).
Displacement Limiter
L030
L010
L010A
L040
P109060
Auxiliary Pad
Inspect all machined surfaces on the auxiliary pad. If any damage or wear is found, replace the
auxiliary pad.
P109059
Repair Instructions
Series 45 Frame K2 Axial Piston Pumps
Inspection
26 |
©
Danfoss | April 2017
AX00000305en-US0101