5.
Assemble the connector plate.
5a
Remove the paper from the gasket self-
adhesive, and attach the gasket to the
bottom of the connector plate. See
Illustration 1.2
.
5b
Fit the sub D9 connector assembly into the
opening in the connector plate and secure
with 2 jack screws. See
Illustration 1.3
.
5c
Check that the edges of the sub D9
connector are seated firmly on the metal
surface of the plate and not on the gasket.
5d
Place the assembled connector plate into
the opening at the top of the drive
enclosure. See
Illustration 1.3
.
1
Gasket
2
Connector plate
3
Opening for connector
4
Screw post
Illustration 1.2 Gasket Installed on Connector Plate
Installation Instructions
Top-entry Sub D9 Connector Kit for
Enclosure Sizes D and E with PROFIBUS Option
VLT
®
FC Series FC 102, FC 103, FC 202, and FC 302
MI38Q302
Danfoss A/S © 10/2017 All rights reserved.
3
