TONE:
Adjusts the EQ
DISTORTION:
Adjusts the amount
of Distortion
LEVEL:
Adjusts the
output level
BATTERY: Uses one S-006P 9-Volt Battery. Danelectro “Vintage Power
Source” batteries are recommended.
BATTERY ELIMINATOR: Uses 9-Volt Battery Eliminator.
Polarity: Center Negative (-). 300mA maximum. Danelectro “Zero Hum”
Battery Eliminators are recommended.
FAB
Distortion
TO BEGIN:
• Connect instrument cable to the IN jack.
Connect amplifier cable to the OUT Jack. If using
an AC Adapter, connect to DC-9V jack. Or use
9Volt battery.
• LED light will be on when foot switch is
activated.
CONTROL FUNCTIONS:
LEVEL: This control sets the level of the output to
the amplifier.
TONE: Rotate this control to adjust the EQ.
DISTORTION: Use this control to set the amount of
Distortion.
caution:
This is a high gain device. Start with the LEVEL
control at 25% and then advance as needed.
D-1 Instructions
INPUT
9V DC
OUTPUT
