Danelec DM800, Installation Manual

Page: 49 / 67

Installation manual for DM800 ECDIS G2
Copyright Danelec Marine A/S
DBS11427-21 Page 49/67
8.1 Service panel

Configuration wizard: Section 5.2 ”Initial configuration of the Master ECDIS”

Monitor configuration: Section 5.2.1 ”Configuration of monitor type”

Cluster setup: Section 5.2.3 “Configuration of cluster size”

External network & equipment: Section 7.1 ”Configuration of access to external data
networks” and section 7.2 ”Configuration of External Equipment”

Local I/O: Section 5.2.6 “Configuration of local serial ports”

Remote I/O: : Section 5.3.1 “Configuration of access to remote port”

USB hardware key management : Section 5.4 ”Configuration of USB hardware key”

Mouse/Trackball configuration : Section 5.2.2 “Configuration of mouse /trackball
”

Manually set time/date : Sets the BIOS time of the system

View I/O interface status: Shows the status from the I/O interface.

View system logs: Displays the system log files

View installation manual: Displays the manuals.

Software update: Consult
DBS11426 “User manual for DM800 ECDIS G2”

Complete system configuration restore: Restores all configuration files from previous
backup file, or dump for support file. (System will restart)

Change service password: Changes the service password.