21
10
PRODUCT SAFETY
This product is manufactured with the highest standards and is double checked in our quality control department for reliability
in the “HIGH VOLTAGE” section.
11
CAUTION
Never remove any panels, or open this equipment. No user serviceable parts inside. Equipment power supply must be
grounded at all times. Only use this product as described in the user manual or brochure. Do not operate this equipment in
high humidity or expose it to water or other liquids. Check the AC power supply cable to assure secure contact. Have your
equipment checked yearly by a qualified dealer service center. Hazardous electrical shock can be avoided by carefully following
the above rules.
Ground all equipment using the ground pin in the AC power supply cable. Never remove this pin. Ground loops should be
eliminated only by use of isolation transformers for all inputs and outputs. Replace any blown fuse with the same type and
rating only after equipment has been disconnected from AC power. If problem persists, return equipment to qualified service
technician.
Always earth all your equipment by the grounding pin in your mains plug. Hum loops should be only cured by proper wiring and
isolation input/output transformers. Replace fuses always with the same type and rating after the equipment has been turned
off and unplugged. If the fuse blows again you have an equipment failure, do not use it again and return it to your dealer for
repair.
Always keep the above information in mind when using electrically powered equipment.
