CONTENTS
• Fast Operation:
Superior heating system quickly brings
the platen to uniform temperature ensuring 100%
bonding.
• Extended Temperature Range:
Thermostat control
adjusts from 100º F to 300º F (38 º –150º C) to cover a
wide range of operating temperatures.
• Programmed Heating Cycles:
Temperature and time may
be set by stored programs in control unit.
• Temperature Readout:
Platen temperature is indicated
on LED display on top of unit.
• Cycle Time Readout:
Remaining time in the cycle is
displayed.
• Oversize Capacity:
Design allows processing of materials
larger than the press platen by sliding the work side-to-
side or out the front or back of the press.
• Extra-Wide Opening:
Opens a full 9” (23cm) for 550
and 10” (25cm) for 250 to provide easy access to
platen surface.
• Easy Pressure Adjustment:
Pressure adjusts and locks
in seconds to accept materials up to 1" (25mm) thick.
• Non-Stick Surface:
Platen surface is specially coated to
help keep adhesives from sticking.
• Free-Floating Platen:
Seats evenly on the work without
shifting to provide uniform pressure across the entire
surface.
• Rugged Construction:
Steel cantilevers increase
durability and allow maximum pressure on work
within the press. Metal top and base construction
adds ruggedness.
PRESS FEATURES AND SPECIFICATIONS
2
Press Features and Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Identification of Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Installation and Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Program Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Procedures For Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Processing Oversize Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Pressure Adjustment Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Wiring Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Periodic Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
