2
Safety Information
SET UP YOUR FURNITURE
PROPERLY
Ensure that all parts are assembled properly
and fully tightened as per the instructions.
When placing in the desired location, ensure
that all legs are resting on the same surface.
EXAMINE YOUR FURNITURE
Examine occasionally to ensure that there are
no loose parts. If loose parts are found,
they must be retightened fully before
additional use.
Warranty
1 YEAR WARRANTY FOR FRAME WICKER AND CUSHION.
WHAT IS COVERED
We warrant the frame to be free of manufacturing defects to the original purchaser for 1 year
WHAT IS NOT COVERED
□
It remains the
customer’s responsibility for freight and packaging charges to and from our service
center.
□
This warranty does not cover commercial use, hardware, acts of nature, fire, freezing and abusive
use.
□
Discoloration or fading of the finish or fabrics as a result of chemicals or spills is not covered.
□
Glass table top breakage and corrosion or rusting of hardware are not covered.
□
In addition, purchase parts are not covered under this warranty.
Care and Maintenance
□
Do not allow water to build up in frames. This will cause corrosion and possible freezing damage
in cold climates.
□
Use a mild soap and water for normal cleaning. DO NOT use janitorial or alcohol based cleaners.
Some cleaners may be marked as natural, but some ingredients can cause discoloration or have
adverse reaction to your finish.
□
Rinse with clean water and dry with a soft, absorbent cloth towel.
□
Cushions, slings, and/or an umbrella may be cleaned by hand with a solution of soap and water
with a clean water rinse. Never machine wash as this will result in shrinking or damage. After
cleaning, tip on end and allow to drip dry. Never use a commercial or home dryer to tumble dry
fabric goods.
□
Treat frames with liquid wax for maximum protection against UV rays and /or salty, damp air.
□
Use and operation: To prolong the life of your outdoor furniture, cover when not in use. Store
indoors during winter months.
CAUTION:
Read all of the instructions in
this manual before you begin assembly.
Failure to do so may result in faulty
assembly and potential injury!