![D&D Technologies MagnaLatch ALERT Owner'S Manual Download Page 6](http://html1.mh-extra.com/html/dandd-technologies/magnalatch-alert/magnalatch-alert_owners-manual_494545006.webp)
MagnaLatch
®
ALERT Gate Alarm System
6
3.1 ATTACHING ALERT MODULE TO LATCH BODY
TOP PULL
VERTICAL PULL
1. Slide top of ALERT Module underneath top housing.
2. Snap into place starting at the top.
3. Snap bottom section into place. Ensure ALERT
is fully snapped into place at all positions.
3 INSTALLATION & OPERATION
3.2 INSTALLATION
MagnaLatch
®
ALERT is designed to fit and work with MagnaLatch “
Series 3” Top Pull and Vertical
Pull models only. See installation instructions provided with the product.
NOTE:
MagnaLatch
®
ALERT will
NOT
fit or work on any other gate latch or previous model of
MagnaLatch
®
.
3.3 POWERING UP
1.
Remove screw and front cover by using a
#1 Phillips-head screwdriver.
DO NOT
lose the screw.
2.
Insert battery as indicated into the battery
compartment with the (+) symbol on top and
the (-) on the bottom.
1
(Note: MagnaLatch
®
installation instructions are included separately and are not inside this manual.)
•owners manual ML3 alert_ENGLISH.indd 6
22/10/14 2:43 PM