D&B xA 10A, Manual

Page: 11 / 14

2.5. Technical specifications
10A/10A-D system data
Frequency response (–5 dB standard) 60 Hz - 18 kHz
Frequency response (–5 dB CUT mode) 100 Hz - 18 kHz
Max. sound pressure (1 m, free field)
with 10D/D6
127 dB
with 30D/D20/D12 130 dB
with D80 130 dB
(SPLmax peak, pink noise test signal with crest factor of 4)
10A/10A-D loudspeaker
Nominal impedance 12 ohms
Power handling capacity (RMS/peak 10 ms) 200/1200 W
Nominal dispersion angle (hor. x vert.) 10A 75° x 50°
Nominal dispersion angle (hor. x vert.) 10A-D 110° x 55°
Splay angle range 25° to 60° with 5° increments
Components 10“ driver with neodymium magnet
1.4” exit compression driver on rotatable waveguide
Passive crossover network
Connections 2 x NL4
1 x screw terminal (ST - up to 4 mm
2
/AWG 11)
Optional fixed cable (PG):
H07-RN-F, 2 x 2.5 mm
2
(AWG 13), 5.5 m (18 ft)
Pin assignment NL4: 1+/1–
Fixed cable (PG): brown + / blue –
Weight 14 kg (31 lb)
Fig. 17: 10A frequency response, standard and CUT modes
Fig. 18: 10A-D frequency response, standard and CUT modes
Fig. 19: 10A/10A-D cabinet dimensions in mm [inch]
d&b 10A/10A-D Manual 1.2 en 11