1. Introduction
This manual describes the facilities and basic functions of the hardware
of the D6 amplifier. A detailed description of the D6 software (firmware)
menu structure and access is given in the D6 Software manual, which is
also provided with the D6.
1.1.
Intended use
The D6 amplifier is a two channel power amplifier and controller unit. It
is designed for use with all current d&b loudspeakers except 2-Way
Active and B2-SUB setups. A linear mode is available allowingthe D6
to be used as a linear power amplifier.
NOTICE:
The device complies with the electromagnetic compatibility
requirements of EN 55103 (product family standard for audio, video,
audio-visual and entertainment lighting control apparatus for
professional use) for the environments E1 (residential), E2 (business and
commercial), E3 (outdoor use in urban areas) and E4 (outdoor use in
rural areas).
Acoustic interference and malfunctions may occur if the unit is operated
in the immediate vicinity of high-frequency transmitters (e.g. wireless
microphones, mobile phones, etc.). Damage to the unit is unlikely, but
cannot be excluded.
1.2.
Scope of supply
Before startingup please verify the shipment for completeness and
condition of the unit:
Qty.
d&b Code
Description
1
Z2700.000
D6 Amplifier
1
Z2610.xxx
Power cord D6 (specific to country)
1
D2017.EN
D6 Amplifier, Hardware manual
1
D2018.EN
D6 Amplifier, Software manual
For any sign of obvious damage
to the unit and/or the power
cord duringshipment under no circumstance connect and operate the
unit. Please contact your local dealer from whom you received the unit.
1.3.
Maintenance/Service
CAUTION:
Do not open the unit. No user serviceable parts inside. In
the case of any damage to the unit under no circumstances connect and
operate the unit.
Refer servicingonly to qualified service personnel authorized by
d&b audiotechnik. In particular in the case of:
- objects or liquids have entered the unit.
- the unit is not operating normally.
- the unit was dropped or the housing is damaged.
D6 Amplifier, Hardware manual
(1.2EN)
Page 4 of 20
