Care and maintenance
6.1 Visual and functional inspections
WARNING!
Potential risk of personal injury and/or
damage to material.
To eliminate the risk of accident due to malfunctioning of a
component, regularly inspect all system components.
Cabinet enclosure
▪ Visual inspection of all fitting plates for obvious damage (e.g.
cracks or corrosion).
▪ Visual inspection of the rear rigging strand for obvious damage
(e.g. cracks, deformation or corrosion) including all drilled holes
of the component.
▪ Inspection of all fitting plates including front grills to ensure they
are securely attached.
Front and Splay (Rear) links
Visual inspection regarding deformation and damage (e.g. cracks
and corrosion) including all drilled holes of the component.
Locking pins
▪ Visual inspection for deformation, cracks and corrosion of the
component.
▪ Inspection for missing ball bearings and damage.
▪ Functional inspection of the release mechanism to ensure it
operates properly.
▪ Regularly lubricate the Locking pins using WD-40
®
or a similar
product.
Mounting frames and adapter frame
Visual inspection regarding deformation and damage (e.g. cracks
and corrosion) including all drilled holes of the component.
Ring cotters
▪ Visual inspection for obvious damage and deformation.
▪ Functional test of the locking mechanism as described in
Chapter 2.3 "Ring cotters" on page 12.
If a ring cotter can no longer be properly fitted to the fixing bolt
and locked, it must be exchanged.
Condition of the ring cotter
[a]: Ring cotter OK
[b]: Exchange the ring cotter
6 Care and maintenance
d&b Z5778/Z5779 Rigging manual 1.2 en
25