2. Safety
instructions
WARNING!
The
Z5160
Load
adapter
must
only
be
used
in
conjunction with the d&b Q-Series rigging accessories
and
loudspeaker
as
described
in
this
mounting
instructions and in the Q-Series Rigging manual.
Installation should only be carried out by fully trained
personel. There are certain rules for installation that must
be complied with.
It is the responsibility of the person installing the
assembly to ensure that the structure being attached to is
suitable for the intended use.
Secondary safeties must always be provided and used
when flying or fixing loudspeaker loads overhead.
3.
Load safety information
LOCK PIN
SECURELY
BEFORE LIFTING
CAUTION
ONLY UNLOCK FOR
DISASSEMBLY ON
GROUND
WARNING!
The maximum permitted working load limit (WLL) of the
Z5160 Load adapter is 500 kg/1100 lb in terms of using
the shackle.
Using the Z5147 Rota Clamp the maximum permitted
working load limit (WLL) is 250 kg/550 lb
The Load adapter must only be moved beyound the rear
edge of the bar of the flying frame while the “1/1 hole”
of the adapter must to be kept in line with the last hole
(hole 27) of the flying frame.
Ensure both locking pins are inserted and locked securely
before lifting the array.
[3]
[2]
[1]
Fig. 5: Z5160 Load adapter Part list
4.
Part list Z5160 Load adapter
− 1 x Z5160 Load adapter
[1]
including:
− 1 x 2t Shackle
[2]
− 2 x Locking pins
[3]
(B2212) connected together with a steel wire
and fixed to the load adapter.
5.
Weight Z5160 Load adapter
1.3 kg/2.9 lb
Z5160 Mounting instructions
(1.0E)
Page 4 of 6
