Position
Angle
1
22,5°
2
45°
3
67,5°
4
90°
5
112,5°
6
125°
MAX array using brackets and
C4 rigging accessories
1
2
3
4
5
6
MAX Horizontal bracket (Z5043) angle settings
WARNING!
(3.0E)
Z5043
Z5043 MAX Horizontal bracket
The Z5043 Horizontal bracket enables MAX cabinets to be fixed to
walls, ceilings or other suitable surfaces and set to a selected vertical
coverage angle.
The vertical coverage angle is set using one of six locating holes for
cabinet mounting at each end of the bracket. Once set to a position
the cabinet is firmly locked in place.
The bracket is normally directly fixed to walls, ceilings or other
suitable surfaces. For multiple cabinet use, a special adapter plate
allows MAX cabinets fitted with the brackets to be joined together in
clusters.
Assembly
Eight mounting holes are provided on the back of the bracket for
fixing it to a wall, ceiling or other suitable surface. Each bracket end
is attached to the M10 threaded inserts [2] top and bottom of the
MAX cabinet using the supplied M10 x 30 hex head bolts, plain and
shakeproof washers. Fixing bolts longer than those supplied must not
be used.
One of the fixing bolts fits through a slot in the bracket end and the
other through one of six locating holes. The table below lists for each
of the six locating holes the resulting angle of the loudspeaker axis
relative to the plane of the mounting surface.
Load safety information
The MAX Horizontal bracket will, when securely mounted, support
the weight of a single MAX loudspeaker cabinet. Secondary safeties
should always be provided and used when flying or fixing
loudspeaker loads overhead.