d&b audiotechnik Z Series, Mounting Instructions

Page: 4 / 14

1.1. Scope of supply
Please verify the shipment for completeness and proper condition
of the items.
Qty. d&b Code Description
1
Z5404
d&b Flying bracket 8S
[1a]
1
Z5405
d&b Flying bracket 10S
[1b]
1
Z5406
d&b Flying bracket 12S
[1c]
Each including:
2 Pan head screw (Torx #T45) M8 x 20
[2]
2 Spring washer [3]
1 Torx key [4] (size #T45)
1 D2958 Mounting instructions
Technical information
Weight Flying bracket 8S 1.6 kg / 3.5 lb
Weight Flying bracket 10S 2.8 kg / 6.2 lb
Weight Flying bracket 12S 2.9 kg / 6.4 lb
1.2. Safety precautions
General safety
Installation and setup should only be carried out by qualified and
authorized personnel observing the valid national Rules for the
Prevention of Accidents (RPA).
It is the responsibility of the person installing the assembly to ensure
that the suspension/fixing points are suitable for the intended use.
Always carry out a visual and functional inspection of the items
before use. In case you have any doubt as to the proper
functioning and safety of the items, these must be withdrawn from
use immediately.
Load safety information
Always align the bracket vertically when using it, whether it is
suspended or placed on top of a loudspeaker stand.
The maximum permitted working load of the Z5404 Flying bracket
8S is 7.4 kg (16 lb) (according to BGV C1) which corresponds to
the weight of one 8S loudspeaker.
The maximum permitted working load of the Z5405 Flying bracket
10S is 13 kg (29 lb) (according to BGV C1) which corresponds to
the weight of one 10S or 10S-D loudspeaker, respectively.
The maximum permitted working load of the Z5406 Flying bracket
12S is 17 kg (37 lb) (according to BGV C1) which corresponds to
the weight of one 12S or 12S-D loudspeaker, respectively.
Fig. 1: Scope of supply
1. Z5404/05/06 Flying bracket 8S/10S/12S
d&b Z5404/05/06 Mounting instructions 1.1 en 4