background image

 

2.1  Intended use

NOTICE!

Only operate d&b SL-Series loudspeakers with the specified and

correctly configured d&b amplifiers, otherwise there is a risk of

damaging the loudspeaker components and the directional

characteristics of the system cannot be achieved.
Applicable d&b amplifiers: 40D | 30D

Product description
The XSLi-SUB and XSLi-GSUB are the installation specific cardioid

subwoofers for the XSLi system. They can be used to supplement

XSLi8 and XSLi12 cabinets, either flown (XSLi-SUB) or ground

stacked (XSLi-GSUB).
When the Z5788 XSLi-SUB Mounting frame is used, XSLi-SUB

cabinets can be flown as pure SUB columns or in mixed arrays in

combination with XSLi TOP cabinets using the additional Z5783

XSL-SUB Mounting adapter.
Both cabinets are actively driven, 2-way bass-reflex designs

housing two long excursion neodymium drivers. One 18" driver

radiates towards the front while one 12" driver radiates towards

the rear of the cabinet.
The front and rear drivers are driven by separate amplifier

channels and operate in independent bass reflex chambers.

Through its cardioid dispersion pattern, this setup avoids unwanted

energy behind the system and greatly reduces the reverberant field

at low frequencies providing highest accuracy in low frequency

reproduction. The frequency response extends from 37 Hz to

110 Hz (35 Hz to 85 Hz - INFRA mode).

The cabinet enclosures are constructed from marine plywood and

have an impact and weather protected 2K finish. The front and

rear of the cabinets are protected by a rigid metal grill backed by

an acoustically transparent and water repellent fabric.
Each side panel incorporates two slots that accepts dedicated

lifting pins (T-handles). During setup, these pins serve as a

temporary lifting aid and can be inserted and locked when

needed.

SL-Series rigging components and arrays
The cabinets are mechanically connected using the rigging strands

on both sides of the cabinet front and a central strand at the rear

of the cabinet.
All necessary rigging components are mounted on the cabinet and

fold and/or slide out when needed.
A detailed description of the SL-Series rigging components is given

in the respective rigging manuals.

2  XSLi-SUB/XSLi-GSUB loudspeaker

 

d&b XSLi-SUB/XSLi-GSUB Manual 1.2 en

6

Summary of Contents for XSLi-SUB












Reviews: