Technical specifications
Fig. 13: Ti10 frequency response
line source, single cabinet,
standard and CUT settings
Fig. 14: Ti10 frequency response
point source, standard and CUT settings
Ti10 system data
Frequency response (–5 dB standard)............................................68 Hz ... 18 kHz
Frequency response (–5 dB CUT mode).......................................120 Hz ... 18 kHz
Max. sound pressure (Line/Arc setups, 1 m, free field)..............................................
with D6/10D....................................................................................................129 dB
with D80/D20/D12/30D..............................................................................132 dB
Max. sound pressure (PS setup, 1 m, free field)..........................................................
with D6/10D....................................................................................................127 dB
with D80/D20/D12/30D..............................................................................130 dB
(SPLmax peak, pink noise test signal with crest factor of 4)
Input level (100 dB-SPL/1 m)........................................................................–13 dBu
Ti10L/P loudspeaker
Nominal impedance......................................................................................16 ohms
Power handling capacity (RMS / peak 10 ms).....................................200/800 W
Nominal dispersion angle (point source, hor. x vert.)...............................90° x 35°
Nominal dispersion angle (line array, horizontal).............................................105°
Splay angle settings................................................................0...15° (1° increment)
Components................................................2 x 6.5“ driver with neodymium magnet
................................................................1.4” exit compression driver on waveguide
............................................................................................Passive crossover network
Connections.....................................................................................................2 x NL4
..............WR option: Fixed cable 5 m (16.4 ft) (H-07-RN-F 2 x 2.5 mm
2
/AWG 13)
Pin assignments........................................................................................NL4: 1+/1–
.....................................................................................Fixed cable: Brown + / Blue –
Weight.......................................................................11 kg (24 lb) / 10.5kg (23 lb)
Fig. 15: Ti10L/P cabinet dimensions in mm [inch]
Ti10 Manual
(1.1 en)
Page 9 of 10
Summary of Contents for Ti10
Page 1: ...Ti10 Manual 1 1 en...
